Technical parameters

Product dimensions: 3,150 x 1,810 x 1,580mm. Engine: 4 cycle 3 cilinder. Horsepower 36. Displacement 796cc. Cooling - Liquid Cooled. Starting - Electric. Brakes - Hydraulic. Steering Skid steering by two hand-controlled levers activating brakes to stop the wheels on either side of the vehicle, allowing it to turn within its own length. For ease of handling, the HUNTER 3 steering transmission provides continuous torque to all axles. Controls Right-hand twist grip throttle and dash mounted choke control. Light switch and ignition switch. Clutch & Transmission Drive System Roller chains drive machined sprockets that are spline-fit onto 1.25" diameter axles.Bearings are greaseable and are protected with double-sealed outer flange assemblies. Frame Formed steel channel construction, welded for high strength and durability. Polyester powder coated for lasting protection. Body formed fiberglass. Full Skid Plate Standard Load Capacity on Land (without accessories) 400 kg. Towing Capacity 1400 lbs/635 kg Seating Capacity 6 persons on land, 6 persons on water. Fuel Capacity See-through steel fuel tank (40 litres) 8 hours of operation. Maximum Speed (on land) 40-60 km per hour. Speed (on water) 15 km per hour. Shipping Weight 650 kg. Grounde clearance 258 mm. Axle Bearing Extensions Front Standard. Hourmeter Standard, Voltmeter Standard, Temperature Water Standard, Low Charge Rate. Light Standard, Low Oil Pressure. Light Standard. Tire 29.5x12.00-10 NHS. Ground Pressure 2.1 psi (14.5 kPa) using tires, 0.67 psi(4.6 kPa)using tracks. Operating Conditions: All weather,all-terrain,-40�C to +40�C.

			Technical parameters
News
		Product dimensions: 3,150 x 1,810 x 1,580mm. Engine: 4 cycle 3 cilinder. Horsepower 36. Displacement 796cc. Cooling - Liquid Cooled. Starting - Electric. Brakes - Hydraulic. Steering Skid steering by two hand-controlled levers activating brakes to stop the wheels on either side of the vehicle, allowing it to turn within its own length. For ease of handling, the HUNTER 3 steering transmission provides continuous torque to all axles. Controls Right-hand twist grip throttle and dash mounted choke control. Light switch and ignition switch. Clutch & Transmission Drive System Roller chains drive machined sprockets that are spline-fit onto 1.25" diameter axles.Bearings are greaseable and are protected with double-sealed outer flange assemblies. Frame Formed steel channel construction, welded for high strength and durability. Polyester powder coated for lasting protection. Body formed fiberglass. Full Skid Plate Standard Load Capacity on Land (without accessories) 400 kg. Towing Capacity 1400 lbs/635 kg Seating Capacity 6 persons on land, 6 persons on water. Fuel Capacity See-through steel fuel tank (40 litres) 8 hours of operation. Maximum Speed (on land) 40-60 km per hour. Speed (on water) 15 km per hour. Shipping Weight 650 kg. Grounde clearance 258 mm. Axle Bearing Extensions Front Standard. Hourmeter Standard, Voltmeter Standard, Temperature Water Standard, Low Charge Rate. Light Standard, Low Oil Pressure. Light Standard. Tire 29.5x12.00-10 NHS. Ground Pressure 2.1 psi (14.5 kPa) using tires, 0.67 psi(4.6 kPa)using tracks. Operating Conditions: All weather,all-terrain,-40�C to +40�C.
Back
Photo catalogue
	Video catalogue

Contacts